Ugello in acciaio temprato e trattato con rivestimento per limitare l’accumulo di materiale all’esterno dell’ugello. Indicato per l’estrusione di materiali caricati come Nylon Carbonio ma idoneo per l’estrusione anche del classico PLA.
Filetto M6, compatibile con tutti i modelli di Raise3D a partire dalla PRO2 in poi (Pro2, Pro3 e relative versioni Plus, E2). NON compatibile con E2CF
Product Highlights:
Low friction coefficient with WS2 coating for low material accumulation
Good lubrication and anti-abrasive performance under high temperature (max. 450 ℃)
Optimized flow behavior for composite filament
Material Specifications:
Mohs Hardness: 7.8
printing temp (in theory): 450 °C
Coefficient of heat conductivity: 26 W/m.k
CTE: 12 (μm/m)/ °C
WS2 coated nozzle is designed for composite filaments with abrasive additives and fillers, such as carbon fiber, ceramic, metal, etc. It is very suitable for fiber reinforced filament with optimized melt flow and durability. By printing with unfilled filament, we recommend a normal brass nozzle.
For Pro2 Series:
Here is the instruction to take out and install the hot ends. Click here.
Here is the instruction to swap nozzle. Click here.
For E2:
Here is the instruction to replace hot end assembly. Click here.
Here is the instruction to swap nozzle. Click here.
Ugello in acciaio – Steel Nozzle WS2 Raise3D – 0.4 mm
59.78€ Iva incl.
2 disponibili
Descrizione prodotto
Dimensione 0.4 mm
Ugello in acciaio temprato e trattato con rivestimento per limitare l’accumulo di materiale all’esterno dell’ugello. Indicato per l’estrusione di materiali caricati come Nylon Carbonio ma idoneo per l’estrusione anche del classico PLA.
Filetto M6, compatibile con tutti i modelli di Raise3D a partire dalla PRO2 in poi (Pro2, Pro3 e relative versioni Plus, E2). NON compatibile con E2CF
Product Highlights:
Material Specifications:
WS2 coated nozzle is designed for composite filaments with abrasive additives and fillers, such as carbon fiber, ceramic, metal, etc. It is very suitable for fiber reinforced filament with optimized melt flow and durability. By printing with unfilled filament, we recommend a normal brass nozzle.
For Pro2 Series:
Here is the instruction to take out and install the hot ends. Click here.
Here is the instruction to swap nozzle. Click here.
For E2:
Here is the instruction to replace hot end assembly. Click here.
Here is the instruction to swap nozzle. Click here.
Prodotti correlati
TPU Premium Nero – Raise3D
97.59€ Iva incl. Leggi tuttoBASF – Ultrafuse PAHT CF15 (Carbon Fiber) 750 gr
79.30€ Iva incl. Leggi tuttoRaise3D – PRO2
4,268.78€3,415.02€ Iva incl. Richiedi ora un preventivo